straight and curved stair lifts - In general, lifts stairways are divided into two categories. It 'sa pretty clear distinction and categorization, as they are mobility aids that will help them to climb stairs and ladders, of course, tend to be straight or curved. The stairs are not just any kind of problem for the chair never installed, but if you have a scale that is curved or includes a 90 degrees or 180 degrees in it, you can notimmediately think you could get a stairlift at home.
Fortunately, you can but of course it is more expensive, a chair lift going into a curve has, however, you must install the soft landing, as will probably be completely customized. straight stairs are easier because they are usually standard prefabricated components that can be installed easily cut to size. In essence, raise the most difficult part of the installation of a scale adjusts chairthe railing that glides. A railing is only easy to make and easy to install, while a curve would take care of each curve, or camber, go to the chair and travel must be done.
So you need to install a stair lift chair on your stairs, if you have a scale that is any type of curve is quite possible. Such scales are scales that have a landing half - usually for 90 degrees turns in your scale, or a completeLanding - usually when you have created 180-degree turn in the scale. Some scales have their turns and curves near the top of the stairs, while others are more short-haul landing in the middle, is obviously all over the house.
The most important thing when you get a chair stair lift, it will be any type of curve (and yes, you can also climb the spiral stairs) go to make sure it is customized. There is nothing worse thanthe chair railing and put together from old bits and pieces that others don 't fit quite right and find your chair freezes or logs, if you are going to come around the corner. As they always say, buy cheap, buy twice, and this is especially true when it comes to something that is high and active wear your stairs every single day.
There are special cases, if you have two straight stairlifts instead of a curved banister. This is an option if theScala, a full 180 degree turn or a full shift of 90 degrees in half. In this case it would be really transferred from one chair to another on the landing so even if you can, it is usually safer, it happened only for a curved stair lift and plump with it. If you go for this option, you should call into question the installer may be your goal page and give you an opinion as to whether you need to land easily be modified to achieve a more secure platform to enableTransfer from one chair to another.
The last thing that should be considered with curved chair lifts scale, how the railing, after all, are where the stairs are positioned to have a middle wall and then go around the corner and finish with a railing people who are worried that the railing does not support the weight of the chair. Fortunately, stair lift chairs on the left these days on rails that are incorporated into the current procedure, there is no weight placed on yourA wall or railing.
